Gamyba procesas plūdė stiklas
Feb 16, 2022
Palik žinutę
The forming process of float glass production is completed in a tin bath filled with protective gases (N2 and H2). Molten glass continuously flows into and floats on the surface of relatively dense tin liquid from the tank kiln. Under the action of gravity and surface tension, the glass liquid spreads and spreads on the tin liquid surface, forming a flat upper and lower surface, hardening, and cooling before being led up to the transition roller table. The rollers of the roller table rotate, pulling the glass strip out of the tin bath and entering the annealing furnace. After annealing and cutting, the float glass product is obtained. Compared with other forming methods, float method has the following advantages: it is suitable for efficiently manufacturing high-quality flat glass, such as no wave ribs, uniform thickness, flat upper and lower surfaces, and parallel to each other; The scale of the production line is not limited by the forming method, and the energy consumption per unit product is low; High utilization rate of finished products; Easy to scientifically manage and achieve full line mechanization and automation, with high labor productivity; The continuous operation cycle can reach several years, which is conducive to stable production; Suitable conditions can be provided for online production of some new varieties, such as electrofloat reflective glass, spray coated glass during annealing, and cold end surface treatment.
The sound insulation performance of single piece float glass is poor, and its performance is assessed based on GB/T8485-2002"Classification and Testing Methods for Air Sound Insulation Performance of Building External Windows" and GBJ75-1984} "Code for Measurement of Building Sound Insulation". Nukreipimas į tarptautinius standartus ISO140 ir ISO717 for nustatymas garsas izoliacija veikimas rodikliai, the weighted garsas izoliacija kiekis Rw is used to measure the sound insulation performance indicators, with the unit being dB; Another sound insulation performance indicator, STC, can be used as a reference indicator.
